Table of Contents
Advertisement
Suppose you want to set up a server called NAS-5400 for the first time. By default the system
obtains the network configuration information through the DHCP server. If a DHCP server
does exist on the LAN, its IP Status will show DHCP, referring that the NAS-5400 has correctly
received IP from DHCP server. Please double click the server name or click the Manage
button, and NAS-5000 series Assistant will automatically activate the browser, connect to the
server's IP address, and then start the Quick Configuration. Please refer to user's manual for
more details.
5. If there is no DHCP server on the LAN, or the client that runs NAS-5000 series Assistant does
not belong to the same network as NAS-5400, the IP Status column will show Unknown
instead.
Note: If the NAS-5400 supports more than 1 network interface, the NAS-5000 series
Assistant will show only one of them for system administrator to configure. To configure the
other network interfaces, you must access the Server Configuration page of NAS-5400 to
setup.
Double-click on the server name NAS-5400 to open the network configuration screen. Input
password into System administrator password field; the default value is blank. You can either
select Get Network Configuration through DHCP to automatically configure the network
through the DHCP server, or choose Use Manual Configuration and enter the IP address,
9
Advertisement
Table of Contents
