Switching On/Off; Manual Operation - Dimplex EF830 Let's Get Started

Product function
> Insert and tighten the front glass panel screw-Fig.7. to secure the front glass panel
to the heater.
> Refit the heater to the wall fixing bracket and use the screw provided (05) to
permanently fix the heater in place.

Switching on/off

Use the on/off switch to power on the appliance (set it to standby mode).
In a standby mode, the appliance can be operated either manually, by the switches
located on the top right hand side of the appliance or by the supplied remote control.

Manual operation

NOTE: The appliance only starts working, if the set temperature is higher than
the ambient room temperature.
10
5059340774787_MNL_EN_V02.indd 10 5059340774787_MNL_EN_V02.indd 10
Appliance powered off
Appliance powered on, set to standby mode
> Press to switch the flame effect on/off.
> Press and hold to toggle between 5 different flame
dim levels
Press to activate low level heating (1000 W)
Press to activate high level heating (2000 W)
EF830
26/07/2023 2:27:25 pm 26/07/2023 2:27:25 pm