MINOLTA-QMS PagePro 9100 User Manual page 82

Symptom Cause
Not all
pages
print.
Several
sheets go
through
the printer
together.
Media is
jamming
76
The printer has the
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
The Cancel key was
pressed.
The media tray is
empty.
Too much static
electricity is present.
Multiple sheets of
transparency (OHP)
media are collecting
static electricity in
the tray.
Transparency (OHP)
media being fed from
the upper or optional
trays is not feeding
correctly.
Multiple sheets of
transparency (OHP)
media are collecting
static electricity in
the tray.
The recommended
transparency (OHP)
or label media are
facing the wrong way
in the tray.
Coated transparency
media has been
used.
Solution
Check your cable.
Make sure no one pressed the Cancel
key while your job was printing.
Check the message window to see if the
tray you are using is out of media.
Do not fan large quantities of
transparency media.
Remove the OHP media and load it in
the tray one sheet at a time. Do not fan
large quantities of transparencies before
loading them.
Envelopes, labels, postcards, special
stock, thick stock, and transparencies
can be printed only from the multi-
purpose tray.
Remove the OHP media and load it in
the tray one sheet at a time. Do not fan
large quantities of transparencies before
loading them.
Load the transparencies or labels
according to the manufacturer's
instructions.
Use uncoated transparency media that is
approved for your printer.
Solving Problems