MINOLTA-QMS PagePro 9100 User Manual page 27

4
Place your fingers underneath the
green tabs and rotate the roller upward
away from you c.
The metal surface will move upward.
5
Remove the used transfer roller d.
5 "
Dispose of it according to your
local regulations.
6
Remove the new transfer roller from its
packaging.
Attention
Do not touch the
transfer roller's
black surface.
7
.Lower the new transfer roller
straight in c, making sure the shaft
is well seated.
8
Rotate the green tabs downward d
so that the metal surface faces you.
9
Align the tabs on the toner cartridge
(one on each side) with the notches in
the printer, and then insert the cartridge
as far as possible into its compartment.
Replacing the Transfer Roller
c
1
d
2
d
2
c
1
c
1
d
2
21