MINOLTA-QMS PagePro 9100 User Manual page 108

3
With the top cover slightly closed, pull
out the tabs c (two on each side).
Pulling the tabs with force may break
them.
4
At the back of the top cover, slightly
pull up the back section, and then
remove it d, sliding it toward the back
of the printer.
5
Remove the brackets (one on each
side) at the rear of the top cover.
5 "
Keep the removed back
section of the top cover and
the brackets in a safe place for
future use.
6
Lower the stopper at the back left of
the top cover.
The stopper prevents the top cover
from closing when the 4-bin mailbox
is installed.
Attention
Before using the printer after removing the 4-bin mailbox, make sure
that the stopper lowered in step 6 is returned to its original position.
7
Close the top cover.
102 4-bin Mailbox