MINOLTA-QMS PagePro 9100 User Manual page 77

2
Open the lower cover c of the
duplex unit, remove the jammed
media d, and then close the lower
covere.
3
If the media jam error is not
cancelled after removing the misfed
media according to the previous
procedure, remove the duplexer
from the printer. Refer to "Failure to
follow instructions as outlined in this
chapter could result in voiding your
warranty." on page 138.
4
Remove any media in the feed slot
at the bottom of the back of the
printer.
5
Reinstall the duplexer. Refer to
"Installing a Duplexer" on page 115.
6
If necessary, open and close the top
cover to cancel the error
message.
Clearing Internal Jams
1
3
2
2
2
3
1
3
1
71