MINOLTA-QMS PagePro 9100 User Manual page 149

1
Thread one end of the strapping
beneath the carton.
2
Pull the two ends of the
strapping together at the
top of the carton.
3
Thread both ends up through the
center of the buckle.
4
Weave the slack of one
end through the buckle.
5
Pull the slack on that end
so that the strapping is
taut in the buckle.
6
Weave the slack of the
other end through the
buckle.
7
Pull all of the
remaining slack
of the strapping
through this side
of the buckle,
until the buckle is
taut against the carton.
8
Pull the buckle against the carton as tightly as possible.
Some slack may still exist.
Repacking the Printer
143