MINOLTA-QMS PagePro 9100 User Manual page 109

8
Attach the transport unit c to the
printer.
9
Insert the metal tabs on the left and
right sides d of the transport unit into
the notches in the printer, and then
slide the transport unit toward the
front of the printer to install it.
10
Using the wrench and screws sup-
plied with the 4-bin mailbox, secure
the left and right brackets on the
transport unit to the printer.
5 "
After using the wrench, keep it
in a safe place for future use.
11
Attach the 4-bin mailbox to the
transport unit.
12
Insert the extensions (one on each
side) at the bottom of the 4-bin mail-
box into the holes in the transport
unit, pushing down until they lock into
place.
13
Using a screwdriver, remove the
connector cover on the left side of the
printer.
5 "
Keep the removed connector
cover in a safe place for future
use.
4-bin Mailbox
1
2
2
103