Resetting The At-Cm70S Line Card; Figure 36. Resetting The Cpu On The At-Cm70S Line Card - Allied Telesis AT-CM20x Series Reference Manual

Resetting the AT-CM70S Line Card

To reset the CPU on the AT-CM70S line card, perform the following
procedure.
1. Locate the CPU RESET button which is recessed in the front panel of
the AT-CM70S line card.
Note
This CPU RESET button is used to reset the CPU on the AT-CM70S
line card only, and is not for other line cards and/or the module
installed in the expansion slot at the rear of the AT-CV5000 chassis.
You may need to reset the CPU on the AT-CM70S line card after
upgrading the firmware or after you have made a configuration
change that requires resetting the module to activate the change.
2. Press the reset button with the tip of a pen or a non-conductive pointy
object, as shown in Figure 36.

Figure 36. Resetting the CPU on the AT-CM70S Line Card

Converteon Media Converter Line Cards Reference Guide
F
P
1
C PU R
ES ET
C
O 2
N
R C L
S
N M L
O
L
E
L O T C
N M L
3
L/ A FD
10 0
4
T
X
R DY
A IS 1
2 912
79