Cpu Reset Button (At-Cm70S Line Card Only) - Allied Telesis AT-CM20x Series Reference Manual

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards

CPU RESET Button (AT-CM70S Line Card Only)

The CPU RESET button on the AT-CM70S line card is used to reset the
settings that are stored locally on its CPU. This feature can only be used
when the AT-CM70S line card is installed in a managed AT-CV1200 or
AT-CV5000 chassis. You may need to reset the system after upgrading
the firmware or after you have made a configuration change that requires
resetting the module to activate the change.
For additional information on how this button actually works, refer to the
AT-CV1200 and AT-CV5000 Chassis Hardware Installation Guide.
56