At-Cv1Kss; Figure 5. At-Cv1Kss Line Card - Allied Telesis AT-CM20x Series Reference Manual

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards

AT-CV1KSS

The AT-CV1KSS, shown in Figure 5, is a Gigabit fiber-to-fiber media
converter line card used for Ethernet based networks. The line card
features two small form-factor pluggable (SFP) transceiver slots. Each
SFP slot can accommodate one SFP transceiver that operates at a fixed
operating speed of one Gigabit. The line cards are hot-swappable into and
out of the chassis.
Each AT-CV1KSS line card features the following:
Two SFP expansion slots (SFP transceiver sold separately)
Refer to "SFP Expansion Slots" on page 35
Port and system status LEDs
Refer to "Fiber Optic Port LEDs" on page 38
DIP switches
Refer to "DIP Switches" on page 44
SFP Transceiver LEDs
Line Card LEDs

Figure 5. AT-CV1KSS Line Card

The AT-CV1KSS line card features two SFP slots. Each SFP slot can
accommodate one fiber or one copper SFP transceiver that operates at a
fixed operating speed of one Gigabit.
For proper operation in the MissingLink™ and Smart MissingLink mode
configured with copper SFPs, the AT-CV1KSS requires to have copper
SFP transceiver that supports LOS (RXLOS) signal.
(For a list of SFP transceivers that can be used with the AT-CV1KSS line
card, refer to the Converteon™ Media Converter Line Cards Reference
Guide.)
DIP Switches
A T - C
V 1 K
S S
L K
A T
S
F
P
LK
AT
S
F
P
521
RD Y
SM L
M L
3K
SFP Expansion Slots
24