Network Topologies; Stand-Alone Topology; Figure 15. Stand-Alone Network Topology - Allied Telesis AT-CM20x Series Reference Manual

Chapter 1: Converteon™ Fast Ethernet and Gigabit Ethernet Line Cards

Network Topologies

Stand-Alone
Topology
This section discusses the network topologies you can create with the
Converteon™ Fast and Gigabit Media Converter Line Cards.
Figure 15 illustrates a stand-alone topology using one AT-CV1000 media
converter with an AT-CM20x Series line card to interconnect two small
networks.
Network 1 has an AT-FS709FC switch connected to the 100Base-FX
port on the AT-CM202 line card in the AT-CV1000 media converter.
Network 2 has an AT-8524M switch connected to the 10/100Base-TX
port on the AT-CM202 line card in the AT-CV1000 media converter.
NETWORK 1
AT-FS709FC
FS709FC
POWER 1X 2X 3X 4X
10BASE-T / 100BASE-TX 8 PORT FAST ETHERNET SWITCH WITH 100FX UPLINK
LINK/ACT
100M
FDX
1 2 3 4 5 6 7 8 9
Twisted Pair
Fiber Optic

Figure 15. Stand-Alone Network Topology

AT-CV1000 (w/ AT-CM202)
AT-8524M
5X 6X 7X 8MDI-X 8MDI
9
OR
NETWORK 2
AT-8524M
AT-8524M
AT-8524M
60