Rear Wheel Removal - Honda ST1100 1996+ Owner's Manual

REAR WHEEL REMOVAL

Wheel removal requires mechanical skill and professional tools such as a torque

wrench. We recommend it be done only by your authorized Honda dealer or other
qualified mechanic.
NOTE:
For some temporary tubeless tyre repairs, wheel removal may not be necessary.

1. Place the motorcycle on its center stand.
2. Remove the parts in sequence, according to the order in the illustration.
NOTE:
In case that the final driven flange tends to stay in the final drive spline, push the

driven flange into the wheel by the pliers as shown number (7).
When removing and installing the wheel, be careful not to damage the sensor and

pulser ring. (Model equipped with CBS/ABS/TCS).
For related torque specifications. The numbers indicate the sequence of disassembly.
- Copyright for this owners manual only ©2011 LIFRASCHAL -
73