Honda ST1100 1996+ Owner's Manual page 46


CAUTION
Two red bulbs are used for the ABS indicator light. Be sure that both bulbs light when

the ignition is ON. If either or both bull fail to light. See your authorized Honda dealer.
ABS/TCS Indicator Light Switch
To dim the intensity of the blinking ABS Indicator Light, push the ABS/TCS Indicator Light
Switch.
Do not operate the switch while riding the motorcycle. Operating the motorcycle with

one or both hands away from the handlebar/controls may result in a loss of vehicle
control.
- Copyright for this owners manual only ©2011 LIFRASCHAL -
46