Honda ST1100 1996+ Owner's Manual page 75

Tighten and torque the following nuts and bolts:

Axle nut torque: 108 N-m (11.0 kgf-m, 80 Ibf-ft)
o
Axle holding bolt torque: 26 N-m (2.7 kgf-m, 20 Ibf-ft)
o
If a torque wrench was not used for installation, see your authorized
Honda dealer as soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capacity.
Apply the brake several times and check for free wheel rotation when released.

For model equipped with CBS/ABS/TCS:
Brake system inspection

CAUTION:
After installation, operate the brake pedal and check the brake operation.

BRAKE PAD WEAR
Refer to Maintenance Precautions. Brake pad wear depends upon the severity of usage, the
type of riding, and road conditions. (Generally, the pads will wear faster on wet and dirty
roads.) Inspect the pads at each regular maintenance interval
- Copyright for this owners manual only ©2011 LIFRASCHAL -
75