Testing The Operation - CYBEX 530C Owner's Manual

! WARNING: Be sure that all electrical requirements are met as indicated in the specifications at
the front of the manual and at the beginning of this chapter prior to proceeding.

Testing the Operation

Use the following instructions to test the full resistance of the unit.
1. Plug the optional power cord into a power outlet from a grounded circuit as described under
Electrical Requirements in this chapter. NOTE: Coil up the remainder of the power cord and place it
out of the way. See Figure 1.
NOTE: Cybex recommends that the unit be unplugged when not in use.
NOTE: Power adapter IEC-320 (TR-18230) is not supplied with additional power cord. Additional power
cord plug varies per country. Ensure a proper power cord is sourced and connected properly.
Consult an electrician if you have any questions.
NEMA 5-15 plug
(TR-18231)
Figure 1
Cybex 530C and 530R Owner's Manual
Plug varies
IEC-320 inlet
per country
(TR-18230)
Additional power
cord for TR-18230
(not included).
Setup
and Assembly
Page 5-13