Assembly Instructions - Sole Fitness F63 Owner's Manual

ASSEMBLY INSTRUCTIONS

1
ASSEMBLY STEP 1
Remove the unit from the box and put it on a flat and level
2
ASSEMBLY STEP 2
1. Install the six Speed Nut Clips (128) on the Frame Base left and right side.
2. Slide the Frame Base Caps (62 & 63) over the Upright tubes (4 & 5).
3. Connect the Lower Computer Cable (49) to the Middle Computer Cable (50) on the right side of the unit.
128
128
Before attaching the hardware in Step 3, make sure the cables you just connected don't get
pinched in between the steel tubing. If they do, this may cause issues that prevent the
treadmill from operating properly.
128
128
128
128
floor.
62
5
7
63
4
50
49