Sole Fitness F63 Owner's Manual page 12

7
ASSEMBLY STEP 7
1. Attach the Support tube (26) between the upright tubes (4 & 5) with four Button Head Socket Bolts.
Tighten bolts firmly.
2. Place the Beverage Holder (158) on top of the Support tube (26) as shown in the illustration.
3. Place the magnet of the safety key (75) in between the Start and Stop buttons (if it isn't already
attached). The treadmill will not function without this in place.
4. Check to make sure all bolts and screws are completely tightened.
131
5
159
8
ASSEMBLY STEP 8
1. Attach the Console mast covers (62 & 63) to the Frame Base (2) with six Tapping Screws (120). Tighten
screws using the Combination M5 Allen Wrench & Phillips Head Screw Driver (131).
NOTE: Please Tighten All Screws After All Components Assembly Complete.
159
159
159
26
120
62
4
63
120
120
120
10
158
120
120