Important Operation Instructions - Sole Fitness F63 Owner's Manual

Hide thumbs Also See for F63:
Table of Contents

Advertisement

IMPORTANT OPERATION INSTRUCTIONS

N EVER operate this treadmill without reading and completely understanding the results of
any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
speed on the computer console and release the adjustment key. The computer will obey the
command gradually.
N EVER use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
N EVER mount or dismount the treadmill while the belt is moving. SOLE treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure. Pushing harder is not going to make the unit go faster r
slower. If you feel the buttons are not functioning properly with normal pressure contact your
dealer.
IMPORTANT SAFETY INSTRUCTIONS
A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement.
To Use:
Place the magnet into position on the round metal portion of the console control head.
1.
Your treadmill will not start and operate without this. Removing the magnet also secures
the treadmill from unauthorized use.
Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
2.
The magnet has strong enough power to minimize accidental, unexpected stopping. The
clip should be attached securely to make certain it does not come off. Be familiar with its
function and limitations. The treadmill will stop, depending on speed, with a one to two
step coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in
normal operation.
4

Advertisement

Table of Contents
loading

Table of Contents