Assembly Step - Sole Fitness F63 Owner's Manual

3

ASSEMBLY STEP 3

Attach the Upright Tubes (4 & 5) onto the Frame Base (2) with eight Button Head Socket Bolts (130) by
using the Combination M5 Allen Wrench & Phillips Head Screw Driver (131). Do not tighten the bolts
completely until step 7 is finished.
4
ASSEMBLY STEP 4
To complete this step, it is recommended that you find something to rest the console on at the appropriate
height or have someone hold the console while you connect the cables
1. Connect the Speed Adjustment Switch Cable (54) to the Speed Cable, Upper (37) Connect the Incline
Adjustment Switch Cable (55) to the Incline Cable, Upper (38). Connect the Computer Cable, Middle (50)
and Computer Cable, Upper (48). Tuck the excess cable into the hand rail tubing to prevent it from
getting pinched.
Before attaching the hardware in Step 6, make sure the cables you just connected don't get
pinched in between the steel tubing. If they do, this may cause issues that prevent the
treadmill from operating properly.
131
130
130
55
38
130
130
37
54
48
50
8