Installing The Clutch Cover - KTM 50 SX 2012 Owner's Manual

15 TUNING THE ENGINE
15.12

Installing the clutch cover

Condition
If the slip speed is too low:
–
Turn adjusting screws
Guideline
1 click increases the slip speed by
Condition
If the slip speed is too high:
–
Turn adjusting screws
Guideline
1 click decreases the slip speed by
Finishing work
–
Install the clutch cover.
–
Check the gear oil level. (
–
Check the clutch setting.
x
Main work
–
Position clutch cover
–
Mount and tighten screws
Guideline
Screw, clutch cover
S00004-10
Finishing work
–
Check the gear oil level. (
Info
The springs may not be pretensioned by more than 17 clicks from the
stop using the adjusting screws.
clockwise.
2
Info
The springs may not be pretensioned by more than 17 clicks from the
stop using the adjusting screws.
counterclockwise.
2
x ( p. 67)
p. 69)
x ( p. 65)
with the seal ring.
1
.
2
p. 69)
250... 350 rpm
250... 350 rpm
M6 10 Nm (7.4 lbf ft)
67