15
TUNING THE ENGINE
15.10
Removing the clutch cover
Warning
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to get into the ground water, the ground, or the sewage system.
Info
Fuel can emerge via the carburetor.
Capture emerging fuel using a suitable container.
15.11
Adjusting the clutch
–
Read the speed.
Slip speed
»
If the specified value is not reached:
–
Adjust the clutch.
x
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Lay the vehicle down on its left side as shown.
S00011-10
–
Remove screws
–
Remove clutch cover
S00001-10
x
Preparatory work
–
Remove the clutch cover.
Main work
–
Turn the outer clutch hub
S00002-10
Condition
If there is no reference point:
–
Turn adjusting screws
–
Turn adjusting screws
Guideline
Basic setting of slip speed
S00003-10
(
p. 66)
x
.
1
with the seal ring.
2
(
p. 66)
x
until adjusting screws
1
counterclockwise to the last detectable click.
2
clockwise by 9 clicks to the basic setting.
2
8,700... 9,300 rpm
become accessible.
2
8,700... 9,300 rpm
66