Installing The Lower Triple Clamp - KTM 50 SX 2012 Owner's Manual

11 MAINTENANCE WORK ON THE CHASSIS
11.9

Installing the lower triple clamp

–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
601605-10
x
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing
1
–
Check whether the top steering head seal
–
Slide on protective ring
601602-10
–
Position the upper triple clamp with the steering.
–
Mount nut
601603-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
601595-11
–
Tighten screws
Guideline
Screw, bottom triple clamp
601594-12
.
4
p. 83)
.
.
3
, but do not tighten it yet.
4
to the front.
5
.
6
is correctly positioned.
2
M8 15 Nm
(11.1 lbf ft)
30