Display Features; Comfort Icon; Rate Of Change Icon; Console Operation - Ambient Weather TESA WS710 Instruction Manual

4. Display Features

4.1 Comfort Icon

The comfort icon is based on humidity ranges specified in Figure 7 .
The icon is displayed for indoor humidity, remote channel 1 humidity
and optional remote channels 2 through 8 humidity.
RH<45%
Dry

4.2 Rate of Change Icon

The rate of change icon
humidity. If the arrow points upward, the temperature is increasing at a
rate of +2°C per 30 minutes (or greater), or humidity is increasing at a
rate of +5% per 30 minutes (or greater). If the arrow points downward,
the temperature is decreasing at a rate of -2°C per 30 minutes (or less),
or humidity is decreasing at a rate of -5% per 30 minutes (or less).

5. Console Operation

Note: The console has three buttons for easy operation:
MIN/MAX/- button, CLEAR/ADJUST button, and CHANNEL/+ button.

5.1 Min/Max Mode

The Min/Max mode displays the minimum and maximum temperature
and humidity (since reset of the unit) for the indoor, remote channel 1
through 8 sensors.
Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to
select the temperature and humidity values you wish to view.
1. Display Maximum. Press the MIN/MAX button once to display
the maximum. The MAX icon will be displayed.
2. Clear Maximum. To reset the maximum values to the current
values, press and hold the CLEAR button for 3 seconds.
RH45%~65%
Comfortable
Figure 7
detects rapid changes in temperature and
-8-
RH>65%
Wet