Wlan Module Installation - Godex EZ-1100Plus User Manual

3-4. WLAN Module Installation

1 Ethernet Cable 1.8M
2 Secure Screw*1
3 Bracket Screw*2
4 Module Bracket
5 WLAN module
6 Module Connection Wire
7 WLAN Antenna
8 Nut (for Antenna)
9 Washer (for Antenna)
10 Fixture Plate
11 Antenna Bracket
1. Make sure the power is off and the
power cable is unplugged. Place the
printer onto a smooth surface and flip the
whole printer unit upside down.
2. Unscrew the screws as indicated in figure.
3. Press the Cover Open Button and open
the top cover.
4. Remove the middle compartment and the
top cover.
5. Remove the Ethernet port cover from
back plate of the printer.
6. Secure the WLAN module onto the
bracket.
EZ-1000Plus User's Manual
1
2
25
1
2