Printer Installation; Ribbon Installation - Godex EZ-1100Plus User Manual

2. Printer Installation

This printer model has the following print modes:
Thermal When printing, ribbon must be installed to transfer the print contents onto the
Transfer (TT) media.
Direct Thermal When printing, no ribbon is necessary; it only requires direct thermal media.
(DT)
Please check which print mode you will use and then go into the Setting Mode to change the
print mode setting if necessary.

2-1. Ribbon Installation

1. Place the printer on a
horizontal surface, and
open the top cover by
pressing the Cover
Open Buttons on both
sides.
2. Loosen and then lift the
upper print mechanism
by pressing the locking
tenons.
3. Place a new ribbon roll
onto the ribbon supply
shaft.
EZ-1000Plus User's Manual 11