Ethernet Module Installation - Godex EZ-1100Plus User Manual

3-3. Ethernet Module Installation

1 Ethernet Cable 1.8M
2 Bracket
3 Ethernet module
4 Module Connection Wire
5 Bracket Screw*2
6 Secure Screw*1
【 】
Note
Please make sure that anti-static precautions
are adopted during the installation.
1. Make sure the power is off and the
power cable is unplugged. Place the
printer onto a smooth surface and flip the
whole printer unit upside down.
2. Unscrew the screws as indicated in figure.
3. Press the Cover Open Button and open
the top cover.
4. Remove the middle compartment and the
top cover.
5. Remove the Ethernet port cover from
back plate of the printer.
6. Secure the Ethernet module onto the
bracket.
EZ-1000Plus User's Manual
1 2
4
1
2
23
3
5 6
1
2