The Snapgear Vpn Router - SnapGear VPN Router User Manual

The SnapGear VPN Router

The following items will have been included with your SnapGear VPN Router:
•
Power adapter
•
Installation CD
•
Printed Quick Install guide
•
Cabling:
•
1 x normal UTP cable – blue
•
1 x "cross-over" UTP cable – (either gray or red) With the LITE+ you will instead
receive two straight through cables (blue).
As shown above, the front panel contains 'status' LEDs. You will also find status LEDs on the rear
panel.
Label
POWER / PWR
System / SYSTEM
Online / ONLINE
Introduction
Figure 1.1 SnapGear SOHO+/PRO front panel LEDs
Activity
On
Flashing
On
On
Description
Power is supplied to the SnapGear VPN
Router.
System will flash once every second while the
SnapGear VPN Router is operating correctly.
If System is on and not flashing, an
operating error has occurred. In this case the
other LEDs form a diagnostic pattern to
indicate what has failed. More information on
these patterns can be found in
Indicates that a valid Internet connection is
present.
7