Table of Contents
Advertisement
LAN Port Quick Setup
1. Enter the name by which the SnapGear VPN Router will be known on the LAN.
2. Choose the method used to set the LAN port network address configuration, either DHCP
or manual.
3. If you choose DHCP or Skip, the Next button will take you to the ISP Connection
configuration page.
4. If you choose Manual, the Next button takes you to the Manual LAN Configuration page
where you must enter an IP address and a Subnet mask for the SnapGear LAN port.
Getting Started
Figure 2.3 LAN Port Quick Setup
19
Advertisement
Table of Contents
