Figure 4.6 Connection Name
Check the Log on to network and Enable software compression check boxes. If you have set up
your SnapGear VPN Router dial-in server to require MSCHAP-2 authentication, you will also need to
check the Require encrypted password check boxes. Leave the other Advanced Options unchecked.
Select the TCP/IP network protocols from the Allowed network protocols list. (Do not select NetBEUI
or IPX. If an unsupported protocol is selected, an error message will be returned.)
Click TCP/IP Settings. Confirm that Server Assigned IP Address, Server Assigned Name, Server
Address, Use IP Header Compression and Use Default Gateway on Remote Network are all
checked. Click OK.
40
Dial-in server configuration