Table of Contents
Advertisement
Windows NT
From the Dial-Up Networking dialog, click the New button. Select the Basic tab.
In the Entry name field, enter SnapGear VPN Router or a similar descriptive name and click Next.
Enter the SnapGear VPN Router's PPTP IP address into the Phone Number field.
Warning: Note that this IP address may change from time to time if your ISP uses
dynamic IP assignment.
In the Dial Using dialog box, select RASSPPTPM (VPN1) and click Next.
Click More and select Edit entry then Modem properties from the menu.
Select the Server tab.
Select TCP/IP only.
Warning: Do not select NetBEUI or IPX. If an unsupported protocol is selected, an error
message will be returned.
Select the Security tab.
Select Accept only Microsoft encrypted authentication. Click OK. Your VPN client is now set
up correctly.
Virtual Private Networking
77
Advertisement
Table of Contents
