Your SnapGear VPN Router's Outgoing Access Restrictions are configured by using security group
classes. Click on the security group classes' link on the Outgoing Access Configuration page to set
the restrictions for each security group class. Each security group class can be configured to restrict
certain TCP/IP application protocols or to block specified TCP and UDP ports.
Figure 6.4 Security Group Classes Configuration
Once you have specified the restrictions you want each security group class to impose, you can
apply these restrictions globally to all machines on your local network or to specific machines or
networks. Use the Add Hosts or Networks section to specify the specific machines or networks from
which you would like to restrict outgoing access.
60
Firewall