SnapGear VPN Router User Manual page 19

Once an IP address is allocated, the SnapGear Setup Wizard will then prompt you to change the
SnapGear VPN Router's internal password. This password controls access to the SnapGear VPN
Router Configuration web pages and the SnapGear VPN Router unit itself. It is recommended that
the new password be chosen so that it is easy or you to remember but hard for others to guess. Your
password must be kept secret to maintain the security provided by the SnapGear VPN Router.
When setup is complete, the wizard will prompt you to launch a web browser and open the
SnapGear VPN Router Configuration web pages.
The SnapGear VPN Router Configuration web pages
Your SnapGear VPN Router is now configured – more configuration options are available through
the SnapGear VPN Router Configuration web pages. To access these, select SnapGear VPN
Router Config Pages from the SnapGear VPN Router Start Menu group, or, alternatively, point
your web browser at the SnapGear VPN Router's IP address (e.g. http://10.0.0.199/). If you cannot
access the web pages, it could be because your browser's proxy settings are not properly configured.
In MSIE, this can be modified in Tools, Internet Options, Connection tab, LAN settings.
Getting Started
Figure 2.2 Setup Wizard Internet setup
15