Table of Contents
Advertisement
Figure 7.6 VPN client setup
Right-click on the new icon and select Properties.
Select the Server Types tab and check the Log on to network, Enable software compression, and
Require encrypted password check boxes. Leave the other Advanced Options unchecked.
Select the TCP/IP network protocols from the Allowed network protocols list.
Do not select NetBEUI or IPX. If an unsupported protocol is selected, an error message will be
returned.
Click TCP/IP Settings. Confirm that Server Assigned IP Address, Server Assigned Name
Server Address, Use IP Header Compression and Use Default Gateway on Remote Network
are all selected. Click OK.
Click OK. Your VPN client is now set up correctly.
75
Virtual Private Networking
Advertisement
Table of Contents
