Installing and configuring your SnapGear appliance
This manual contains instructions for installing and configuring your SnapGear appliance
on your network. The basic steps and related chapters are:
Step
1. Interconnect the SnapGear appliance
and PCs on a local area network.
2. Connect the telecommunications
hardware/modem for dial-in/dial-out
Internet access.
3. Set up the network IP addresses and
firewall.
4. Set up Internet hardware and Internet
account and connect to the Internet.
5. Set up users' security dial-in/dial-out
VPN.
Introduction
Chapter
Chapter 2, Getting started
Chapter 3, Connecting to the Internet
Chapter 2, Getting started
Chapter 3, Connecting to the Internet
Chapter 4, Dial-in server configuration
Chapter 6, Firewall
Chapter 7, Virtual Private Networking
5