SnapGear VPN Router User Manual page 14

Internet link
•
Connect to the Internet with an external cable modem, DSL, dial-up or ISDN modem
•
Serial ports (COM1, COM2) connect to the Internet through an external modem or
ISDN T/A (LITE/LITE+ models have a single serial port)
•
10baseT Ethernet port (Internet) connects to the Internet through a cable or ADSL
modem
•
Front panel serial status LEDs (for TXD/RXD)
•
Online status LEDs (for Internet/VPN)
•
Rear panel Ethernet LEDs (Link Transmit/Receive)
LAN link
For the SnapGear SOHO+ and PRO models:
•
10BaseT LAN port to connect to local network Ethernet hub
•
Rear panel Ethernet LEDs (Link Transmit/Receive)
For the SnapGear LITE and LITE+ models
•
10/100BaseT LAN port to connect to local network
Dial-in Connection
• For SnapGear SOHO+ and PRO, external modems may be attached to the serial ports
for dial-in connection
Environmental
•
External power adaptor (voltages/current depend on individual models)
•
Front panel status LEDs: Power Test
•
Operating temperature 0° C to 40° C
•
Storage temperature -20° C to 70° C
•
Humidity 0 to 95%, non-condensing
Introduction
10