Table of Contents
Advertisement
Figure 5.1 IP Configuration
To configure the LAN Interface of the SnapGear VPN router, simply choose between a dynamically
or a statically assigned IP address. If the LAN interface of your SnapGear VPN Router obtains its IP
address from a DHCP server on your local network, then check DHCP assigned. For a static IP
address on the LAN interface, enter the IP Address and Netmask in the fields provided. Note that
you must enter a static IP address if the SnapGear VPN router is to act as the DHCP server on your
local network.
49
Network Configuration
Advertisement
Table of Contents
