SnapGear VPN Router User Manual page 85

Enter an appropriate name for your connection and click Finish. Your VPN client is now set up
correctly.
Connecting the remote VPN client
Firstly, connect to the Internet using the network connection to your ISP.
After the connection to your ISP has been authenticated, select the connection for the SnapGear
VPN Router VPN.
For Windows 95/98/2000, enter the username and password given to you by the SnapGear VPN
Router's VPN administrator and click Connect.
For Windows NT, click Dial and enter the username and password given to you by the SnapGear
VPN Router's VPN administrator.
After you have been authenticated to the network, you can check your e-mail, use the office printer,
access shared files and browse the network – as if you were physically connected to the LAN.
To disconnect the VPN tunnel connection to the remote SnapGear VPN Router:
•
From the desktop, double-click My Computer then Dial-Up Networking and select the
phonebook entry for the SnapGear VPN Router VPN.
•
For Windows 95/98/2000 click the Disconnect button
•
For Windows NT, click the Hang up button
You may then disconnect from the Internet.
Virtual Private Networking
81