Table of Contents
Advertisement
If you choose, you can manually configure the PCs on your network. For each non-configured
Windows 2000 workstation PC on the network, open TCP/IP Properties (see above for details on
the location of this option), and ensure that Use the following IP address is checked. Then add the
following information:
•
A unique IP address and appropriate subnet mask
•
Default Gateway (enter the IP address of the SnapGear VPN Router)
•
In the DNS tab, enter the DNS server address(es) provided by your ISP.
Getting Started
Figure 2.3 Internet Protocol (TCP/IP) Properties
23
Advertisement
Table of Contents
