About Threshold and Ratio
As shown in the diagram below, these parameters
determine how the volume is to be compressed.
Threshold
Adjusting the Tone (EQ)
You can use the three-band graphic equalizer (LOW/MID/
HIGH) to adjust individual sounds.
Parameter
Value
0.5–8.0
Q
(only for MID)
20–1k (LOW),
Freq
20–8k (MID),
(Frequency)
1k–8k (HIGH)
Gain
-15–+15 dB
0.5:1
1:1
Ratio
1.7:1
4:1
50:1
Input Level
Explanation
Width of the frequency
range
A higher Q narrows the
affected area.
Center frequency
Amount of boost/cut
Simulating the Acoustics
of a Performing Location
(AMBIENCE SECTION)
Here you can modify the actual acoustics of the space in
which you're playing the drums.
A wide variety of parameters to work with include,
overhead mic and room mic positioning, wall material,
"type" of room, reverb etc.
1.
Press the [AMBIENCE] button .
[AMBIENCE] button will light, and the AMBIENCE
SECTION screen will appear.
Button
[F1] button
[F2] button
[F3] button
[F4] (AMB ONLY) button
[F5] (EDIT) button
Effects
Explanation
Turns the effect when using
overhead mics on/off.
Turns the ambience effect of the
room on/off.
Turns the reverb effect on/off.
Auditions the ambience effect (p. 71).
Edits the ambience settings.
69