Copying A Trigger Bank - Roland V-Drums TD-30 Owner's Manual

Copying a Trigger Bank

You can copy a trigger bank from preset memory or from
a USB flash drive.
For user memory, you can rearrange the data by
exchanging the copy-source and copy-destination
trigger banks.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want to
keep those settings, back them up to a USB flash drive
before you continue ("Backing Up the Settings" (p. 108)).
1.
Hold down the [SHIFT] button and press the
[USB MEM] button .
[USB MEM] button will light, and the COPY A screen will
appear.
2.
Press the [F5] (A B C) button twice to access the
COPY C screen .
3.
Press the [F1] (TRIG) button .
The COPY TRIGGER BANK screen will appear.
Copy-source
Copy-destination
4.
Use the [F1]–[F3] buttons to select the copy-
source .
Button
[F1] (USER) button
[F2] (PRESET) button
[F5] (USB) button
Explanation
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
Copy from preset memory.
Copy from backup data saved on a
USB flash drive
5.
Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination .
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6.
Press the [F4] (EXCHNG) or [F5] (COPY) button .
A confirmation message will appear.
(Example: Copying a trigger bank from a USB flash drive)
If you selected [F1] (USER) in step 4, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7.
Press the [F5] (EXECUTE) button .
The trigger bank will be copied.
Trigger Settings
137