5.
Press the [F1] (TD-20) button or the [F2] (TD-20X)
button to specify the type of backup data .
Button
[F1] (TD-20) button
[F2] (TD-20X) button
(Example: When [F1] (TD-20X) is selected)
7.
Use the [–] [+] buttons or the dial to select the
backup data that you want to import .
8.
Press the [F5] (IMPORT) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
9.
Press the [F5] (EXECUTE) button .
The kit data will be imported from the USB flash drive.
Explanation
TD-20 backup data will be
imported.
TD-20X or TDW-20 backup data will
be imported.
Backing Up the Settings
Deleting Backup Data from a
USB Flash Drive (DELETE)
You can delete the unneeded backup data from a USB
flash drive.
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
Press the [USB MEM] button .
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3.
Press the [F4] (DELETE) button .
The USB DELETE screen will appear.
4.
Press the [F1] (BACKUP) button or the [F2] (1 KIT)
button to specify the type of backup data .
Button
[F1] (BACKUP) button
[F2] (1 KIT) button
(Example: When [F1] (BACKUP) is selected)
6.
Use the [–] [+] buttons or the dial to select the
backup data that you want to delete .
7.
Press the [F5] (DELETE) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
8.
Press the [F5] (EXECUTE) button .
The data will be deleted from the USB flash drive.
Explanation
The backup data will be deleted.
The kit data will be deleted.
111