Roland V-Drums TD-30 Owner's Manual page 80

Effects
5.
Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination .
If you selected [F2] (PRESET) in step 4, specify whether
you're copying from TD-30 or from TD-20X.
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6.
Press the [F4] (EXCHNG) or [F5] (COPY) button .
A confirmation message will appear.
(Example: Copying settings from a USB flash drive)
If you selected [F1] (USER) in step 4, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7.
Press the [F5] (EXECUTE) button .
The effect setting will be copied.
MEMO
• The " " (p. 70) is included in the ambience
SEND LEVEL
settings copied by this operation. Similarly, the
"SEND LEVEL" (p. 72) is also included in the multi-effect
settings copied by this operation.
• The comp/EQ settings for each pad (instrument) can
be copied as described in "Copying an Instrument"
(p. 63).
80