Mixer
Copying Mixer Settings
The drum kit mixer's VOLUME (volume of each pad) and
PAN (stereo position of each pad) settings can be copied
to another drum kit in a single operation. You can also
copy from a drum kit in preset memory or a USB flash
drive.
If you're copying from user memory, you can exchange
the copy-source and copy-destination settings.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want
to keep those settings, back them up to a USB flash
drive before you continue (p. 108).
1.
Hold down the [SHIFT] button and press the
[USB MEM] button .
[USB MEM] button will light, and the COPY A screen will
appear.
2.
Press the [F5] (A B C) button to access the
COPY B screen .
3.
Press the [F1] (VOLUME) or [F2] (PAN) button to
select the settings that you want to copy .
(Example: When [F1] (VOLUME) is selected)
4.
Use the [F1]–[F3] buttons to select the copy-
source .
Button
[F1] (USER) button
[F2] (PRESET) button
[F3] (USB) button
66
Explanation
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
Copy from preset memory.
You can choose from TD-30 or TD-
20X preset data. Select this if you
want to return to the factory-set
settings
Copy from backup data saved on a
USB flash drive
5.
Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination .
If you selected [F2] (PRESET) in step 4, specify whether
you're copying from TD-30 or from TD-20X.
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6.
Press the [F4] (EXCHNG) or [F5] (COPY) button .
A confirmation message will appear.
(Example: Copying a user memory mixer settings)
If you selected [F1] (USER) in step 4, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7.
[F5] (EXECUTE) button .
The mixer settings will be copied.