Roland V-Drums V-Cymbal Ride Owner's Manual

©
in)
Ba
an
NJ
—_
oO
cake
Nbe-vv¥-e- 0.
v-cymbal Ride CY-15R
V-Cymbal Crash C Y- 1 4 C
V-Cymbal Hi-Hat C Y- 12 H
Owner's Manual
Thank you and congratulations on your choice of the Roland V-Cymbal CY-15R/CY-14C/CY-12H.
Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. 2) and
"IMPORTANT NOTES" (p. 3). These sections provide important information concerning the proper —
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every
feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
RGA A ANE SA AR I ABN HRC NARI NNER LET LAER A
Before You Begin
When using a TD-10:
1. Make sure you are using a TDW-1 version that includes "with V-Cymbal Control" (see p. 4).
2. Select TRIGGER BANK 2 in the TD-10 for use with the V-Cymbals (see p. 9).
* If you are using another sound module, you have to set the trigger parameters. Refer to "Trigger Parameter Settings
for the Sound Module (p. 10)."
Wing Nut
(Tighten it to obtain.the desired movement)
2
Stopper ————_——+ Mp ~— Tighten the nut with a commercially
(Be sure to orient available drum key
it correctly)
* For more details, refer to p. 6.
Copyright © 2000 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.