1. Manuals
  2. Brands
  3. Roland Manuals
  4. Drums
  5. V-Drums V-Pad PD-80R
  6. Owner's manual

Roland V-Drums V-Pad PD-80R Owner's Manual

Hide thumbs Also See for V-Drums V-Pad PD-80R:
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you, and congratulations on your choice of the Roland PD-80/PD-80R V-Pad.
201a
Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. 3–4) and
"IMPORTANT NOTES" (p. 4). These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every
feature provided by your new unit,
saved and kept on hand as a convenient reference.
Before using the PD-80/PD-80R, you need to make the following settings.

Contents of the Package

❑ PD-80 or PD-80R (pad unit)
❑ Connection Cable
❑ Tuning Key
■ Owner's Manual (this manual)
Names of Components
Stand Fixing Screw
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
02892934
'04-4-4N
Owner's Manual
Owner's manual
• Head tension adjustment (p. 5)
• Settings for the percussion sound module (p. 2)
Hoop (Rim)
Tuning Bolt
Holder
should be read in its entirety. The manual should be
Sensor
Head
Washer
Output Jack
Frame
202

Advertisement

Table of Contents
loading

Related Manuals for Roland V-Drums V-Pad PD-80R

Summary of Contents for Roland V-Drums V-Pad PD-80R

  • Page 1: Contents Of The Package

    Owner's Manual Thank you, and congratulations on your choice of the Roland PD-80/PD-80R V-Pad. 201a Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 3–4) and “IMPORTANT NOTES” (p. 4). These sections provide important information concerning the proper operation of the unit.
  • Page 2 When used with a percussion sound module capable of positional sensing, you can obtain tonal changes by varying the location at which the pad is struck. • You can perform rim shots and cross-sticking with the PD-80R. For information on sound generator and trigger input combinations, refer to p. 6. •...
  • Page 3 When using the unit with a rack or stand recom- • Before using this unit, make sure to read the mended by Roland, the rack or stand must be instructions below, and the Owner’s Manual. carefully placed so it is level and sure to remain ....................

  • Page 4: Important Notes

    • Try to prevent cords and cables from becoming • Brushes can be used to play the PD-80 and PD-80R entangled. Also, all cords and cables should be when the TD-8 and TD-10 are used as the sound placed so they are out of the reach of children.

  • Page 5: Adjusting The Head Tension

    Strike • Once you connect the PD-80 or PD-80R to Trigger the head to check the feel and response as you adjust the tension.

  • Page 6: Attaching The Pad To A Stand

    TD-8 3 (SNARE) • Use the included cable to make connections. • With the PD-80R, make sure to use the supplied stereo TD-10 2 (SNARE) cable when connecting it. Otherwise (if you use a monaural cable), you won’t be able to employ striking...

  • Page 7: Replacing The Head

    Replacing the Head About the PD-80R's Lock Bushings The PD-80R is provided with lock bushings to prevent rotation and loosening of the tuning bolts caused by vibration When the Head Should Be Replaced transmitted from the hoop, as the result of using rim shots or The head is an expendable item that eventually will wear out other performance techniques.

  • Page 8: Australia/New Zealand

    Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. MEXICO IRELAND PHILIPPINES IRAN AFRICA AFRICA G.A. Yupangco & Co. Inc. Casa Veerkamp, s.a. de c.v. Roland Ireland MOCO, INC.

This manual is also suitable for:

V-drums v-pad pd-80

Table of Contents