Naming A Drum Kit Chain (Name); Using A Drum Kit Chain; Copying A Drum Kit Chain - Roland V-Drums TD-30 Owner's Manual

Drum Kit

Naming a Drum Kit Chain (NAME)

Each chain's name can use up to 12 characters.
1.
Select the drum kit chain you want to name in the
DRUM KIT CHAIN screen .
2.
Press the [F3] (C EDIT) button .
3.
Press the [F5] (NAME) button .
CHAIN NAME screen will appear.
4.
Edit the name .
For details on how to edit a name, refer to "Assigning a
Name" (p. 29).
5.
Press the [EXIT] button to return to the DRUM
KIT CHAIN screen .

Using a Drum Kit Chain

Here's how to select a drum kit chain you've created, and
step through the drum kits in the order you want to use
them.
Selecting a drum kit chain
1.
Press the [CHAIN] button to make it light .
The drum kit chain function will turn on.
2.
Press the [F1] ( CHAIN#) button or [F2] (CHAIN#
) buttons to select the chain number that you
want to use .
52
Switching drum kits
1.
Use the [–] [+] buttons or the dial to recall the
drum kits in the step order you specified .
2.
When you've finished performing, press the
[CHAIN] button to make it go dark, or press the
[EXIT] button .
The drum kit chain function will turn off.
MEMO
• You can assign a footswitch or pad to recall a drum kit
chain or a drum kit. For details, refer to "Assigning a
Function to a Footswitch or Pad (CONTROL)" (p. 117).
• If differences in volume levels between kits is a
problem, press the [MIXER] button and adjust "Kit
Volume" (the overall kit volume (p. 65)).

Copying a Drum Kit Chain

You can copy a drum kit chain from preset memory or
from a USB flash drive.
For user memory, you can rearrange the data by
exchanging the copy-source and copy-destination drum
kit chains.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want
to keep those settings, back them up to a USB flash
drive before you continue (p. 108).
1.
Hold down the [SHIFT] button and press the
[USB MEM] button .
[USB MEM] button will light, and the COPY A screen will
appear.
2.
Press the [F5] (A B C) button twice to access the
COPY C screen .