Backing Up All Data To A Usb Flash Drive (Save) - Roland V-Drums TD-30 Owner's Manual

Backing Up All Data to a USB
Flash Drive (SAVE)
Here's how to back up the entire contents of user
memory (p. 16) to your USB flash drive (up to 99 sets).
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
Press the [USB MEM] button .
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3.
Press the [F1] (SAVE) button .
The USB SAVE screen will appear.
4.
Use the [–] [+] buttons or the dial to select the
backup number in which you want to save your
settings .
Backup number that contain no data are indicated by a
"*" preceding the backup name.
MEMO
If you press the [F4] (NEW) button, the lowest-
numbered backup number that contains no data will
be selected.
5.
Press the [F5] (SAVE) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
MEMO
If you want to assign a name to the backup data,
press the [F4] (NAME) button.
6.
Press the [F5] (EXECUTE) button .
Your data will be saved on the USB flash drive.
Backing Up the Settings
Naming your backup data (NAME)
If you want to assign a name to the backup data,
press the [F4] (NAME) button at the confirmation
message in step 5.
The USB SAVE NAME screen will appear.
For details on how to assign a name, refer to
"Assigning a Name" (p. 29).
The name you assign here is shown only on the
TD-30.
109