Adjusting The Attack And Release (Transient); Adjusting The Tonal Character Of Each Pad (Pad Eq) - Roland TD-07 Owner's Manual

Customizing a Drum Kit (KIT EDIT)
Adjusting the Attack and Release
(TRANSIENT)
Here's how to emphasize or de-emphasize the attack or
release portion of the sound. You can adjust this individually
for each pad.
1
Press the [ ] (KIT EDIT) button.
2
Use the [C][A] buttons to select "TRANSIENT,"
and press [ ] (ENTER) button.
The TRANSIENT screen appears.
TRANSIENT
ON/OFF
3
Strike the pad that you want to make settings.
4
Use the [C][A] buttons to select an item
(parameter) and use the dial to edit the value.
Parameter Value
ON/OFF
ON, OFF
Time 1–10
Attack
-100–100
Release
Gain -12.0–+6.0dB
H&R Link ON, OFF
5
Press the [ ] (DRUM KIT) button to return to
the DRUM KIT screen.
14
SN
ONÀ
Explanation
Turns the effect on/off.
Time over which the sound
rises (attack)
Attack adjustment
Release adjustment
Volume after transient is
adjusted
Selects whether the head and
rim parameters are edited as
a set (ON) or independently
(OFF).
Adjusting the Tonal Character of Each Pad
(PAD EQ)
Here's how to adjust the tonal character of each pad (pad
equalizer).
1
Press the [ ] (KIT EDIT) button.
2
Use the [C][A] buttons to select "PAD EQ," and
press [ ] (ENTER) button.
The PAD EQ screen appears.
PAD EQ
ON/OFF
3
Strike the pad that you want to make settings.
4
Use the [C][A] buttons to select an item
(parameter) and use the dial to edit the value.
Parameter Value
ON/OFF ON, OFF
LoFrq
20Hz–1kHz
LoGain -15–+15dB
MidQ 0.5–8.0
MidFrq
20Hz–16kHz
MidGain -15–+15dB
HiFrq 1kHz–16kHz
HiGain
-15–+15dB
H&R Link
ON, OFF
5
Press the [ ] (DRUM KIT) button to return to
the DRUM KIT screen.
SN
ONÀ
Explanation
Turns the effect on/off.
Center frequency of the low
range
Amount of boost/cut for the
low range
Width of the frequency range
A higher Mid Q narrows the
affected area.
Center frequency of the mid
range
Amount of boost/cut for the
mid range
Center frequency of the high
range
Amount of boost/cut for the
high range
Selects whether the head and
rim parameters are edited as
a set (ON) or independently
(OFF).