Midi Connectors - Roland V-Drums TD-30 Owner's Manual

USB MEMORY port
You can connect a USB flash drive
(separately sold) here (p. 85). You can
play back audio files from it (p. 86),
or save the TD-30's settings to the
USB flash drive (p. 108).

MIDI connectors

Use these connectors to
connect MIDI equipment
(p. 141).
TRIGGER INPUT jacks
Connect your pads, cymbals, hi-hat, and kick etc. to these jacks (p. 37).
* Use a stereo cable (1/4-inch TRS phone type) if you're connecting a dual-trigger type pad.
USB COMPUTER port
With a USB cable, you can connect the TD-30 to
your computer for recording MIDI information to
your software sequencer (DAW) (p. 140).
Panel Descriptions
AC IN jack
Connect the included AC power cable to
this inlet.
[ON] switch
This switch turns the unit on/off (p. 39).
25